Zavio F312A Manual do Utilizador

F312A User Manual 0

4. Select the AP you wish to connect. 5. Enter password at active transmit key if you need. If you don't know the setting of the wireless AP

10  Use the following IP address: Select this when the fixed IP address is set. IP address: Enter the IP address of the device. Subnet mask:

Chapter 4. Using IP Camera via Mobile Phone 4.1 Using IP Camera via iPhone You can use Zavio Web User Interface via iPhone. Please follow the set

124.2 Mobile Phone Viewing To use IP cameras via mobile phones, please make sure your RTSP is set to “On” (Default is “On”). To change the setti

Chapter 5. MSN Messenger Please see the following steps to set up the Messenger function. 1. You can download MSN software freely and create a ne

6. The Camera at home will show up with its Public IP and Private IP if the option of IP Notification is “On”. ( You can enter “Ping” to show up

15 9. Click Action button and choose Start control panel to use control panel. 0. The dialog box will show up with “This application is

1 161. The IP Camera will accept your invitation to start Control Panel. 12. You can click Camera icon to snapshot then t

13. You can click paint palette icon showing up with tool bar to set up image. Then, you an use the tool bar to optimize video Brightness , Con

Chapter 6. Configuration of Main Menu In the far left side of main configuration are Setting, Client Setting, Image Setup. For more details, you

F312A User Manual 1F312A IP Camera Firmware User Manual - Contents - CHAPTER 1. MINIMUM SYSTEM REQUIREMENT...

6.1 Live View A. Snapshot You can capture a still image shot by the camera and save it in your computer. 19 B. Zoom in / out the image

C. Video play buttons Symbols Meaning Pause the current video Play the video Stop the current video Record the current video Note: Con

6.2 Setting This function is only for the Administrator. Click this button to get into the Basic and Advance settings menu. Click Basic fold

6.3 Client Setting This function is only for the client. Click this button to control Mode, View Size, Protocol, and Video Buffer. 6.3.1 Mode C

6.4 Image Setup You can use the tool bar to optimize video Brightness, Contrast, Saturation and Hue. 6.4.1 Brightness The higher value the bri

Chapter 7. Setting-Basic Click the folder of Basic to display the sub folders including System, Camera, Network, and Security. 24

7.1 System Click the folder of System to display the sub-folders including Information, Date / Time, and Initialize. 25

7.1.1 Information The Information page provides the product factory information which includes Product Name, Firmware Version and Web Version.

7.1.2 Date / Time The Date/ Time page displays all options of time setting.  Current date / time: This displays the current date and time of th

7.1.3 Initialize  Reboot: Click this bottom to reboot this IP Camera. A confirmation dialogue will appear and then click “OK” to process. It ta

F312A User Manual 2Firmware User Manual Chapter 1. Minimum System Requirement We strongly recommend your computers follow our minimum requireme

29 Upload Language Pack: Upgrade the device language pack. Click “Browse” and select the file for upgrading. A confirmation dialogue will appea

7.2 Camera Click the folder of Camera to display the sub folders including General, MPEG4 and MJPEG. 30

7.2.1 General  RTSP : Switch On / Off Note: RTSP (Real Time Streaming Protocol) is a protocol for use in streaming media system which allows cl

7.2.2MPEG4 A. Computer View  RTSP (if RTSP mode is On, please check “Setting → Basic → Camera → General ”)  RTSP Port: Specify the transmiss

and Excellent.  Fixed Bitrate: Set the bitrate of MPEG4 image transmission for a line. You can select the values from 64, 128, 256, 384, 512, 76

B. Mobile View  RTSP (if RTSP mode is On, please check “Setting → Basic → Camera → General”)  RTSP Port: Specify the transmission port number

7.2.3 MJPEG  MJPEG Viewer Port( If RTSP is off, please check “Setting → Basic → Camera → General”):  Unicast Streaming Video / Au

7.3 Network Click the folder of Network to display the sub folders including Information, PPPoE, DDNS, UPnP, Bonjour, IP Notification, and Messen

7.3.1 Information Display the MAC address of the device.  Obtain an IP address automatically (DHCP): If a DHCP server is installed on the net

 Use the following IP address: Select this when the fixed IP address is set. IP address: Enter the IP address of the device. Subnet mask: Ent

Chapter 2. Using IP Camera via Web Browser 2.1Windows Web Browser 1. Start your web browser, and enter the IP address or host name of the IP came

7.3.2 PPPoE (Point-to-Point Protocol over Ethernet) If your ISP provides Dynamic IP with authentication by username and password, type all PPPo

 Use the following DNS server address: Select this when you set the fixed address as the IP address of DNS server.  Primary DNS server: Enter

7.3.3 DDNS (Dynamic DNS) DDNS is a system which allows the domain name data held in a name server to be updated in real time. The most common use

Note : How to apply DDNS username and Host name?? You can apply DDNS username and Host name by the following steps: 1. Login http://www.dyndn

3. Login with new account and click Account → My Hosts → Add Host Services 4. Type domain in the Hostname field and select sub-domain 43

5. After type information, check your DDNS service. 6. Type your DDNS User ID, Password and Host name in Setting → Network → DDNS. After comple

7.3.4 UPnP (Universal Plug and Play) If you have a Router to access to internet and the Router supports UPnP IGD function, you need to turn on

7.3.5 Bonjour Bonjour, also known as zero-configuration networking, enables automatic discovery of computers, devices, and services on IP network

7.3.6 IP Notification When network notify type is set to “ON”, you can send an e-mail notification of the completion of the network setting.  N

 Authentication: Select the authentication required when you send an email. Off: Select if no authentication is necessary when an email is s

3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, and Image Setup.

7.3.7 Messenger Messenger function provide an easy-connect feature. User can easy to know what camera’s private and public IP address is.  P

7.4 Security Click the folder of Security to display the sub folders including Account and HTTPS. 50

7.4.1 Account The device fault account and password setting is “admin / admin”. That means everyone who knows IP address can access the device in

7.4.2 HTTPS HTTPS is a URI scheme used to indicate a secure HTTP connection. It is syntactically identical to the http:// scheme normally used fo

Chapter 8. Setting-Advance Click the folder of Advance to display the sub folders including FTP client, SMTP, HTTP event, Schedule, Motion detect

8.1 FTP Client Use this menu to set up for capturing and sending images to an FTP server. By using FTP client function, you can send the image fi

8.1.1 General Select “On” when you use FTP function. The FTP client setting page appears. Select “Off”, when you do not wish to use the FTP cli

8.1.2 Alarm sending Set to forward the image file to the specified FTP server linked with the alarm detection by the built-in motion detection

 Alarm  Motion Detection: Click it on for using Motion Detection function as a sensor. You can set motion detection function at the motion det

 Effective period: Set the period when the periodical sending is effective. Always: The periodical sending is always effective. Schedule: Yo

2.2 Mac Web Browser 1. Click the Safari icon, and enter the IP address of the IP camera in the Location / Address field of your browser. Note

8.1.3 Periodical sending You can set to send an image file to FTP server periodically by selecting On to send the image file to FTP server linked

 Effective period: Set the period when the periodical sending is effective. Always: The periodical sending is always effective. Schedule: Yo

8.2 SMTP Set the SMTP menu when you want to send an image via e-mail. By using Mail (SMTP) function, you can send a mail with attached image file

8.2.1 General Select On when you use the SMTP function. The common setting options are displayed below. Select Off, if you do not wish to use t

 Authentication: Select the authentication required when you send an email. Off: Select if no authentication is necessary when an email is s

64which is sent according to the alarm detection when Alarm sending of the alarm tab is set to On, the characters standing for the sensor type a

8.2.2 Alarm sending Set to send the mail with connection to the alarm detection by the built-in motion detection function. Select On to send the

 Alarm  Motion Detection: Click it on for using Motion Detection function as a sensor. You can set motion detection function at the motion de

 Effective period: Set the period when the periodical sending is effective. Always: The periodical sending is always effective. Schedule: Yo

8.2.3 Periodical sending You can set to send an image file by SMTP server periodically by selecting On to send the image file by SMTP server link

2. Use the default account “admin” and default password “admin”. Note : The default user name “admin” and the password are set at the factory

 Effective period: Set the period when the periodical sending is effective. Always: The periodical sending is always effective. Schedule: Y

8.3 HTTP event Set up this menu for sending commands to an HTTP server. By using HTTP client function, you can send the command defined by yourse

8.3.1 General  HTTP event: Set up the HTTP server URL, port, User ID, Password, and Proxy Server settings. For example: URL: 192.168.1.

8.3.2 Alarm sending Set to send the commands via the alarm detection, external sensor input or built-in motion detection function. Select On to s

 Alarm  Motion Detection: Click it on for using Motion Detection function as a sensor. You can set motion detection function at the motion dete

 Effective period: Set the period when the periodical sending is effective. Always: The periodical sending is always effective. Schedule: Y

8.4 Schedule When you click Schedule on the Advance mode menu, the Schedule setting menu appears. This is the same menu as the setting menu which

768.4.1 Setting  Schedule Selection: Select the list box to specify the schedule you want to set. FTP -Alarm FTP - Periodical e-Mail (S

778.5 Motion Detection There are three Motion Detection functions as sensors to set for different detecting zones. Each one has Threshold and Se

788.5.1 Setting Threshold: It means the extent which the alarm will be triggered.  Sensitivity: It means that how often the sensor will scan th

3. The monitor image will be displayed in your browser. In the far left side of main configuration are Setting, Client Setting, and Image Setup.

798.6 System Log The System Log function allows users to review any changes and events happened. The system starts logging automatically after s

80CHAPTER 9. APPENDIX A. Frame-rate and Bitrate Table – Help to set IPCamera with your network environment to access Internet. Base on your ne

81 A.1.3. MJPEG @ 15fps / Kbps Quality 704*480 352*240 176*120 Excellent 7500 2800 1000 Detailed 5000 1500 700 Good 3500 1000 500 Standard 200

82A.2. PAL CCD IPCamera A.2.1. MPEG4 @ 25fps / Kbps Quality 704*576 352*288 176*144 Excellent 1800 400 100 Detailed 600 150 50 Good 400 100

83 A.2.3. MJPEG @ 15fps / Kbps Quality 704*576 352*288 176*144 Excellent 7800 1700 650 Detailed 4300 1000 450 Good 2500 650 350 Standard 1300

84A.3. CMOS IP Camera A.3.1. MPEG4 @ 30fps / Kbps Quality 640*480 320*240 160*120 Excellent 1000 300 90 Detailed 400 150 50 Good 300 100 30

85 A.3.3. MJPEG @ 15fps / Kbps Quality 640*480 320*240 160*120 Excellent 4000 1500 600 Detailed 2400 900 400 Good 1600 650 300 Standard 1300

86B. Storage Requirement Table - Help to set Recording Storage System. Please refer to the following table to find out the capability for reco

87B.1.3. MPEG4 Storage Requirement GB / channel / day Image-Size Bitrate Setting Frame-Rate SettingStorage Requirement 704*480 2048 30 23.0 7

88 B.1.4. MJPEG Storage Requirement GB / channel / day @ 15fps Quality 704*480 352*240 176*120 Excellent 79.1 29.5 10.5 Detailed 52.7 15.8 7

Chapter 3. Setting up Wireless Configuration The wireless network has to be set up by using cable network connection. After setting the camera co

89B.2. PAL CCD IPCamera B.2.1. MPEG4 Storage Requirement GB / channel / day @ 30fps Quality 704*480 352*240 176*120 Excellent 19.4 4.3 1.

90B.2.3. MPEG4 Storage Requirement GB / channel / day Image-Size Bitrate Setting Frame-Rate SettingStorage Requirement 704*480 2048 30 21.6

91 B.2.4. MJPEG Storage Requirement GB / channel / day @ 15fps Quality 704*480 352*240 176*120 Excellent 84.2 18.4 7.0 Detailed 46.4 10.8

92B.3. CMOS IPCamera B.3.1. MPEG4 Storage Requirement GB / channel / day @ 30fps Quality 640*480 320*240 160*120 Excellent 10.5 3.2 0.9 Detai

93 B.3.4. MJPEG Storage Requirement GB / channel / day @ 15fps Quality 640*480 320*240 160*120 Excellent 42.2 15.8 6.3 Detailed 25.3 9.5 4

94C. System Requirement & D1 Performance of 16 Channel IP Camera Equipment Configuration Software: MainConsole Version 2.6.4 Professio